A kite with old or bad coating will take a long time to dry out.
Dirt bonds easily to kite cloth with bad or old coating.
Even a new kite is susceptible to mould without extra coating.
It is harder to sell a kite with bad coating.
Ultramar Kite-Refit Coating makes sure that kite cloth is highly water and dirt repellent. Often considerably better than the original kite cloth. The cloth stays dry much longer and is less susceptible to mould and less air permeable.
Easily applied with a paint roller or sprayer.
Used for many years for professional coating of kites and mattress kites.
Makes the fabric perfectly water and dirt repellent.
Additional protection for new kites.
The kite stays drier and lighter. Perfect for large mattress kites.
Less wear to stitching.
Kite cloth becomes less susceptible to mould.
For coating and protecting all types of kites and mattress kites.
For coating and protecting all types of nylon fabric structures.
Please note: Ultramar Kite-Refit Coating is no nanocoating or regular impregnation product.
CAUTION! Do not inhale the spray. Only use in well-ventilated locations. Protect your eyes, mouth and skin. Read the instructions on the packaging before use.
The cloth to be treated must be clean and dry.
Spray Ultramar Kite-Refit Coating evenly on the cloth. From left to right and top to bottom. A thin layer will be sufficient. The product can also be applied using a paint roller.
Let the fabric dry before treating the reverse of the kite.
Let the cloth dry out.
Caution! Do not inhale the spray.
Only use in well-ventilated locations.
Protect your eyes, mouth and skin.
Read the instructions on the packaging before use.
COATING: Ultramar Kite-Refit Coating is the perfect protection for kites. After treatment the cloth will be perfectly water, dirt and oil repellent and less susceptible to mould, and the airtightness will have increased.