Not sure how to use Sprayhood & Tent Protector correctly? On this page, you’ll find a clear step-by-step explanation of what to do, which products you need, and what to pay attention to. This helps you avoid mistakes before purchase and during use.
Does the fabric need to be clean before using Sprayhood & Tent Protector?
Yes. Sprayhood & Tent Protector only works properly on clean and dry synthetic fabric.
Protection needs to bond to the surface of the fabric. If dirt is left behind, it becomes sealed in and both the result and the durability of the protection are reduced.
Which Ultramar products should I use before Sprayhood & Tent Protector?
For a good result, always start with the correct Ultramar maintenance products:
- Sprayhood & Tent Shampoo to clean the entire surface
- Power Cleaner only locally, if deeply embedded stains or stubborn contamination remain visible after cleaning
Only after these steps do you apply Sprayhood & Tent Protector as the protection step.
Why is the Ultramar three-step maintenance process important?
The Ultramar maintenance process consists of three clear steps:
- Cleaning
Removes dirt and general contamination. - Stain removal
Targets stubborn or deeply embedded contamination that remains after cleaning. - Protection
Restores water repellency and helps slow down new contamination.
Each step has its own purpose. Combining or skipping steps reduces the final result and the durability of the protection.
Can I use Sprayhood & Tent Protector without Power Cleaner?
Yes, you can. Power Cleaner is only needed if there are still areas with deeply embedded stains or stubborn contamination after cleaning.
If the fabric looks evenly clean after washing, you can proceed directly with Sprayhood & Tent Protector.
How do I apply Sprayhood & Tent Protector evenly?
For an even and reliable result, follow these tips:
- Make sure the fabric is clean and completely dry
- Work in sections and distribute the product evenly
- Use enough product to achieve uniform coverage
Using too little product can lead to uneven protection.
Can I use Sprayhood & Tent Protector in direct sunlight?
It is best not to use Sprayhood & Tent Protector in direct sunlight.
Work in the shade or in mild conditions if possible. This gives you better control during application and prevents the product from drying too quickly.
How long does the fabric need to dry after treatment?
Allow the fabric to dry completely after treatment before using or folding it.
The exact drying time depends on temperature, humidity and ventilation. In most cases, allow several hours and make sure the fabric feels dry before use.
Can I apply a second layer of Sprayhood & Tent Protector?
In most cases, one even layer is sufficient.
For older or heavily worn fabric, a second light layer can help achieve an even result. Only apply a second layer once the first layer has been properly absorbed.
What do you need for the best result?
If you want to carry out the complete maintenance process properly, Ultramar offers maintenance bundles. These bundles contain the correct products for cleaning, optional stain removal and protection, and are often more cost-effective than buying products separately.
Do not be too economical with product use. Running out of product during treatment is inconvenient and can affect the final result. Choosing a slightly larger package is often more practical, and extra product is useful for future maintenance and touch-ups.
In short
Sprayhood & Tent Protector is always used as the final step, on clean and dry synthetic fabric. By following the Ultramar maintenance process and using enough product, you achieve an even and long-lasting result.
Ultramar helps consumers clean, maintain and protect boat covers, tents, convertible roofs, plastic windows and other outdoor materials themselves, using PFAS-free maintenance products that are easy to use at home and based on a proven three-step maintenance process.
