Do you want to use Ultramar Power Cleaner safely and effectively? Below you’ll find exactly how to apply it correctly within the Ultramar 3-step maintenance process.
Do I need to clean first before using Power Cleaner?
Yes. Always use Power Cleaner after you have cleaned the fabric with Sprayhood & Tent Shampoo.
Why?
- You remove loose dirt and surface contamination first
- Power Cleaner can focus on deeply embedded stains and stubborn contamination
- You work more efficiently and use less product
Power Cleaner is step 2: Stain Removal in the Ultramar 3-step maintenance process.
Should I use Power Cleaner on wet or dry fabric?
Always apply Power Cleaner on dry fabric.
A dry surface allows the product to penetrate into the fibers and work effectively on difficult-to-remove discoloration and heavy contamination.
How do I apply Power Cleaner properly?
Work directly on the affected areas.
- Apply the product generously to the stained area
- Use a soft brush to work it into the fibers
- Make sure the area remains visibly wet with product
Treat only the contaminated areas and avoid unnecessary application on clean fabric.
How long should Power Cleaner sit?
Let Power Cleaner sit for at least 1 hour.
For stubborn contamination, it may sit longer. Deeply embedded stains often require time to loosen gradually.
Can I apply Power Cleaner more than once?
Yes. Multiple applications are normal for heavy contamination.
You can:
- Reapply the product
- Brush again during the process
- Repeat the treatment until the stain has sufficiently faded
This is especially common with older or heavily weathered fabrics.
Do I need to brush during or after the waiting time?
You should brush:
- Immediately after application to distribute the product into the fibers
- Again during the waiting time if needed for stubborn spots
Always use a soft brush to avoid damaging the fabric.
How do I rinse Power Cleaner correctly?
Rinse the fabric thoroughly with clean water.
- Use plenty of water
- Make sure no product residue remains
- Allow the fabric to dry completely
After stain removal, the fabric is clean but unprotected. Always apply the appropriate Ultramar Protector as step 3 (Protection) once the material is completely dry.
Important Notes
- Always test on an inconspicuous area first
- Do not use on chrome or polished aluminum
- Work in dry conditions for best results
- Never use impregnation products on plastic windows (Ultramar has dedicated plastic window products for that purpose)
Summary
Ultramar Power Cleaner is step 2 in the 3-step maintenance process: after cleaning and before protection. Use it on dry fabric, allow it to sit for at least one hour, and rinse thoroughly. For deeply embedded stains or stubborn contamination, repeat the treatment if necessary.
This ensures your fabric is properly prepared for long-lasting protection.
Ultramar helps consumers clean, maintain and protect boat covers, tents, convertible tops, plastic windows and other outdoor materials themselves with PFAS-free maintenance products that are easy to use and designed for home use, based on a proven three-step maintenance process.
